Specification
| Output |
- Max Configurable Power (Watts) : 360 Watts / 650VA
- Output Frequency (Sync To Mains) : 50/60 Hz +/- 1 Hz Unsynchronised
- Other Output Voltages : 230 V
- Topology : Line Interactive
- Waveform Type : Stepped Approximation To A Sinewave
- Transfer Time : 4 Ms Typical : 8 Ms Maximum
|
| Input |
- Input Frequency : 40 - 70 Hz +/- 5 Hz Auto-Sensing
- Input Voltage Range For Main Operations : 140 - 300V
- Number Of Power Cords : 1
|
| Batteries & Runtime |
- Battery Type : Lead-Acid Battery
- Typical Recharge Time : 6hour(S)
- Nominal Battery Voltage : 12 V
- Battery Volt-Amp-Hour Capacity : 84
|
| Communications & Management |
- Control Panel : LED Status Display With On Line : On Battery
- Audible Alarm : Alarm When On Battery : Distinctive Low Battery Alarm
|
| Surge Energy Rating |
|
| Physical |
- Maximum Height:142MM, 14.2CM
- Maximum Width:101MM, 10.1CM
- Maximum Depth:279MM, 27.9CM
- Net Weight:4.4KG
- Shipping Weight:5.0KG
- Shipping Height:220MM, 22.0CM
- Shipping Width:140MM, 14.0CM
- Shipping Depth:324MM, 32.4CM
- Color:Black
|
| Environmental |
- Operating Temperature:0 - 40 °C
- Operating Relative Humidity:0 - 95 (Non-Condensing) %
- Operating Elevation:0 - 3000meters
- Storage Temperature:-20 - 50 °C
- Storage Relative Humidity:0 - 95 (Non-Condensing) %
- Storage Elevation:0 - 15000meters
- Audible Noise At 1 Meter From Surface Of Unit:40.0dBA
- Protection Class:IP20
|
| Warranty |
|
APC Easy 650VA Offline UPS
This device automatically adjusts voltage levels to match your equipment, using a high-quality cable with an IEC plug to connect to a 230V UPS. It provides clear status information about the unit and utility power conditions. The unit optimizes battery performance and reliability through intelligent charging. It also offers early fault analysis on batteries for timely maintenance, conducts periodic self-tests, and displays visual indicators for easy understanding of unit and power status. It reserves power and run time for critical equipment while providing surge protection for less important devices.
The device safeguards hardware and data during power outages, surges, and spikes. It also protects secondary electronics without compromising battery power for primary electronics. Furthermore, it ensures the product is approved for safe operation with the connected service provider equipment and in the specified environment.
